0.00 $

No products in the cart.

0.00 $

No products in the cart.

Stallion VTOL Pack

12.99 $

Stallion VTOL – High Performance 3D Printed Tiltrotor VTOL RC Plane. Designed for Missions with Challenging Takeoff and Landing Locations.

Wingspan

1340mm

AUW

2000-3000g

Optimal Speed

60-70 km/h

Bed Size

min. 220x220mm

Material

LW-PLA + PETG

CHECK ALSO

Stallion

Stallion - High performance 3D printed twin-motor RC Plane with a modular design. Crafted for optimal performance and customization for various applications.

34.99 $

OVERVIEW

General Data

Stallion is our popular aircraft now available in the VTOL version. It features a tricopter layout design with front tilt and a rear stationary motors. The geometry remains nearly unchanged from the regular version of Stallion. The VTOL pack includes modified wings and a set of components for conversion to the VTOL version. All files from this pack are available in STL and STEP formats, enabling users to integrate and easy modifications. If you're already a user of the basic Stallion version, now you can easily reprint some parts and modify your aircraft.

Using VTOL Pack requires purchasing the basic version of Stallion.

3D PRINTED DRONE STALLION

Check assembly manual, full list of needed accessories and more tips here:

3D Printed Stallion VTOL Drone Manual

VERTICAL TAKEOFF AND LANDING

Take off And Land in the Most Challenging Locations

Stallion Drone VTOL

STL AND STEP FILES

All files in the VTOL Pack are available in STL and STEP formats. Print them right away, or make your modifications if you need to.

3D Printed RC Plane VTOL Design

GALLERY

3D Printed RC PLANE VTOL StallionSTALLION VTOL DRONE DESIGN 3D PRINTED STALLION VTOL BUILD3D Printed VTOL Drone3D Printed RC Plane Stallion Build 3D Printed Fixed Wing VTOL

VIDEOS

If you are building this aircraft from scratch, familiarize yourself with the manual of basic Stallion version and acquire the necessary accessories. Below is a list of additional items needed for the conversion to the VTOL version.

Required accessories and electronics:

Motors Emax ECOII 2807 1300KV link / T- Motor F90 1300KV link
Propellers 7x4 / 7x5 / 7x6 (two CCW, one CW) link
Servos 2pcs PowerHD 1810MG link / GDW DS041MG link
ESC 3pcs Emax Formula Series 45A BLHeli32 link / Lumenier 51A link
Battery 4S (max 4S3P 10,5Ah Li-Ion) or similar LiPo link
Bearings 2pcs 3x8x4mm Flange Bearing link
Screws / Nuts / Washers 3 pcs M3 Screws, Nuts and Washers

Print Settings:
Check the specified print settings on the Print Settings Page

RELATED PRODUCTS